Perfect Precision

The G-10 is a specialist salmon slicer. It has a really long and thin flexible blade that makes it suitable for this purpose only. These knives are typically used for cutting pieces of smoked salmon or trout, the blades are ideal for slicing long thin pieces, which is how smoked salmon is traditionally presented.

The handle is the same as other G series knives and is comfortable to hold. There is a gap of about a inch from the handle where the blade is not sharpened to provide a bit of protection. This is the longest knife blade that Global produce and as such does not fit in any of the blocks and also may not slot in a drawer. Ideally it needs to be put on a magnetic rack.

The G-29 is another fairly specialist knife in the G series line. The knife is suited for work with medium sized fish and is a bit of a cross over between a cook's knife and a chopper. It is also perfectly suited for cutting up chicken, turkey or other poultry that may be cooked whole.

The deep blade is designed to help the knife cut through bones to remove fish heads, tails and fins as the knife can be swung down onto a chopping board. Useful for preparing fish if you like to buy your fish whole, this knife will also create deep slicers to serve up.

A Yanagi is a specialist Japanese knife for slicing pieces of fish for sushi and sashimi. The long blade is to allow the chef to make long broad strokes to make sure that the cut is made in one go. Global's Yanagi Sashimi slicers are ground in typical Japanese fashion with a single bevel on the face of the knife. The single bevel is to allow professional chefs more control to control the thickness of the sashimi slices and make sure the cut is perfect for presentation.

Global make two versions of the Yanagi Sashimi, the other is the G-11 and has a 25cm blade.

A Yanagi is a specialist Japanese knife for slicing pieces of fish for sushi and sashimi. The long blade is to allow the chef to make long broad strokes to make sure that the cut is made in one go. Global's Yanagi Sashimi slicers are ground in typical Japanese fashion with a single bevel on the face of the knife. The single bevel is to allow professional chefs more control to control the thickness of the sashimi slices and make sure the cut is perfect for presentation.

Global make two versions of the Yanagi Sashimi, the G-11 has a 25cm blade and the G-14 has a 30cm blade.

The little brother to the G-1, featuring the classic GS Global handle, the GS-2 has the same blade, but shorter at 13cm. The round end to the blade allows you to slice into boney meat like chicken and duck without the tip of the blade catching in the bone. The GS-2 is basically the GS-3 with a rounded end and therefore can also be used as a general purpose cook's knife for cutting and chopping.

The G Series of Global knives is a classic collection of large longer bladed knives with weighted hollow handles, used for general food preparation. All knives are made in two parts with the blade and the handle being welded together. The blade itself is made of Cromova18, Global ’s special blend of Molybdenum Vanadium steel, which makes the knife hard compared to European blades and able to retain a decent edge for a long time. Global ’s special feature though is that the knives are ground down to a very acute angle (15 Degrees) down the face of each side of the blade. Rather than having a beveled edge, this is how Global knives are renowned for being so sharp and for staying sharp for such a long time. Global were one of the first Japanese brands into the UK market and have built up a cult following and the brand is well recognized. Always wash your knives by hand, dry thoroughly and never put them in a dishwasher. All Global knives are covered by the manufacturers guarantee against faults and defects. Knives should be stored in a block or other protective case to protect the blades and always kept out of reach of children. Knives cannot be sold to any person under the age of 18. When you place an order with us, you are confirming that you are 18 or older. Sometimes we may ask for proof of identification.

The G-8 is more or less the G-9 bread knife without the serrations, but it makes a great carving knife, as it has a long and narrow blade. This carving knife makes excellent work of joints with no bones in. It will allow you to cut thin even slices of meat, so works best with hams, joints of beef, salmon and any de-boned lamb. It is a worthy alternative to the G-3, although we would suggest if you are looking for the standard carving knife to go for the G-3.

The GN-005 is Global Ni's larger carving knife, also known as a slicer knife. Perfect for carving Sunday roasts or filleting large fish.

#VALUE!

The GNM-04 has a flexible blade making this knife a virtual utility knife for all sorts of kitchen tasks. It can be most similarly compared to

The Global G-7 Oriental Deba is a traditional Japanese knife with a one sided grind and it is essentially the G-4 with a single bevel. It is a short but heavy knife, made to cut up whole fish. The blade is squat and has some weight to it, signifying its strength in chopping.

The weight of the deba knife allows it to cut through fish bones to sever the head and tail from the fish and this is what it is designed to do. Using the tip of the blade you can also fillet fish, Japanese style. As a traditional Japanese knife we do not recommend purchasing this knife, if you are looking for a general purpose cook's knife. If you like the shape of the knife but wish to use the blade for more European style cooking, we recommend the G-4.

The oriental Deba also comes in a smaller size as the GS-4.

As a chef's knife the G-4 is suitable for most kitchen tasks, slicing, dicing and chopping. There is very little difference in performance between the G-4 and the classic chef knife, the G-2. The difference is cosmetic, i.e. the kink in the blade. This gives the knife an 'oriental' styling, but it bears no meaning to the function of the knife. It is not designed specifically for oriental food, or oriental ways of using a knife, it is just a different shape of cook's knife. It does have a nice upward curve to the blade, which when cutting with the knife allows it to rock up and down on the chopping board, a bit like a mezzaluna.

The shape has been so popular that the second new series of Global knives, the Global NI series, has been based on this knife design. The G-4 also comes in a fluted version as the G-66 and in a smaller size as the GS-58.

The G-83 is labelled as a fluted Santoku knife, but it is the fluted version of the G-4 cook's knife and suitable for a variety of tasks. The knife was a launched as a special 'Oriental Style' pack along with the GS-55 and GS-58 and is now available loose. It can be used for a variety of kitchen tasks and is a multipurpose knife.